پشتیبانی: 9 صبح الی 5 بعد از ظهر  | 88617414 داخلی 800 و 801-شماره همراه : 09309058669

0

سبد خريد شما خالي است !

محصولات شما برزورسانی
مبلغ کل
0 ﷼

0

ليست علاقه مندي هاي شما خالي است!

0

برای مقایسه محصول ، محصولات مورد نظر را از فروشگاه انتخاب کنید.

فروشگاه اینترنتی آریا کنترل

کارت کنترل خاموش شدن-مدل 1801MS

موجود
تولید کننده : SES
کد محصول :
برگشت به مجموعه: اعلام حریق
برچسب ها :
SES-ASA Engineering SRL یک زیرمجموعه از گروه GMB است. این گروه یک گروه خصوصی اروپایی است که شرکت های آنها در برنامه های در زمینه کنترل و ایمنی فعالیت می کنند و محصولات زیادی در این زمینه در سراسر جهان تولید و به فروش می رسانند.
توضیحات
Model: 1801MS
Order Code: 15.01.0032

 

 


The control unit 1801MS, represents the most technologically advanced solution on the market in the field of fire detection and extinguishing for industrial applications. The card  1801MS is interfacing through the supervised input circuits directly with the detection loops (smoke, temperature, flame and voltage-free contacts) and with the pressure switches of the extinguishing system,  it generates the relating alarm and fault controls (both Open Collectors and Relay) and activates the Electro-valve control supervised output (E.V.) of the extinguishing system.

The use of the SINGLE CHIP microprocessor, available on all the 1800 family, surely offers great advantages, both in application and in reliability. Through the Dip Switches on the card, it’s possible to configure the functional parameters of the product to make it suitable to the various applications, such as the configuration of the supervised inputs with contact normally open (N.O.) or normally closed (N.C.). The selection of the card operation as cross zone or single zone, the configuration of the Open Collectors and relays outputs, normally de-activated and/or de-energised or activated and/or energised, storage of the relay outputs with mode Latching o No Latching. Other selection are for the short-circuit on the supervised inputs seen as fault or alarm, selection of the intervention of the extinguisher discharge pushbutton with mode manual only or automatic/manual, pre-setting of the delay time for the activation of the Electro-valve of the extinguishing system.
A complete self-diagnostics, enabled by the use of the micro-processor, allows both the control and the check of card functionality in all its parts, by activating, in case of damage, the relating malfunction outputs (Fault).

On the front panel of the card are present the redundant LED signals that visualise the status of activation and fault of the supervised inputs, of the Electro-valve control output of the extinguishing system, of the operating mode in cross zone and the signal of active card (Ready), dependant  from the Watch Dog circuit.
The push-buttons on the front panel allow to perform the test and inhibition operations of the two Zones dedicated to the fire detection and inhibition of the output dedicated to the Electro-valve control.Note: The operations performed through front key-board are stored inside the card in a permanent way and are kept stored also switching-off the power supply.

The control unit makes available on the connector DIN 41612 at 32 pins, the following main signals:

• Power Supply  24 V DC
• Supervised Inputs
• Status Open Collectors  Outputs
• Relay Outputs
• Supervised Power Output of Electro-Valve Contro