پشتیبانی: 9 صبح الی 5 بعد از ظهر  | 88617414 داخلی 800 و 801-شماره همراه : 09309058669

0

سبد خريد شما خالي است !

محصولات شما برزورسانی
مبلغ کل
0 ﷼

0

ليست علاقه مندي هاي شما خالي است!

0

برای مقایسه محصول ، محصولات مورد نظر را از فروشگاه انتخاب کنید.

فروشگاه اینترنتی آریا کنترل

سنسور آتش - UV-185/5CZ

موجود
تولید کننده : Oggioni
کد محصول :
برگشت به مجموعه: اعلام حریق
برچسب ها :
شرکت OGGIONI یکی از تولید کنندگان ایتالیایی در زمینه سنسور های شعله (آتش) می باشد که در زمینه صنایع نفت و گاز و ... فعالیت گسترده دارد.
توضیحات

UV-185/5CZ: UV Flame detector

Outputs: 4-20mA, Relays & sink current (conventional)

GRP Housing, 10-28Vdc, fixed sensitivity setting, latching alarm.

 

 

Power    

12-24 Vdc (10-28 Vdc)

Current normal                    

25 mA at 24 Vdc

Current in alarm, at 24 Vdc 

+/- 75 mA at 24 Vdc

Startup time

 

Alarm output setting                            

Selectable LEDs and relays latching/non latching, factory and EN54-10 setting: latching

Connectability

  • a fire control panel by means of end of line (EOL) and alarm resistor (current increase).
  • a device that can take relay outputs
  • a PLC with a 0-20 mA input

End of line and alarm resistor

To be adjusted to the fire control panel, free terminals dedicated for the resistors are available.
Remark: the value of the alarm- and EOL resistor combination must be >500 Ohm.

Relay outputs:

  • alarm relay
  • fault relay

De-energized during normal operation, no alarm, SPDT, 30 Vdc – 2 A, 60 W
Energized during normal operation, no fault, SPDT, 30 Vdc – 2 A, 60 W

Current output

Standard available 0-20 mA (stepped, sinking, non-isolated)

Alarm response time

>8 s,

Cone of vision                     

900

Housing

Glass Reinforced Polyester (GRP)

Ingress protection              

IP65

Temperature (operating)

-250 C tot +70C (-130 F tot +1580 F)

Automatic and manual Self-Test

Automatic Sensor Test (Built in Self Test) and manual sensor self-test

Sensitivity settings

Selectable: very high, high, medium, low (factory setting: high, standard for EN54-10 certified models)

Dimensions

125 x 80 x 57 mm  (4.9 x 3.15 x 2.25 inch)

Weight

492 gram (1.09 lbs)

Cable gland

M20 (cable conduit diameter 5.5-13 mm in two steps 5.5-8 mm and 8-13 mm)

Pressure compensating Element

PCE (Pressure Compensating Element) avoids moisture build up in the detector housing, caused by pressures differences as a consequence of temperature fluctuations.

Terminals

Suitable for massive cores 0.6 to 1.5 mm2 (24 to 16 AWG)

CE marking                                          

See www.oggionisas.com for Declaration(s) of Conformity

EN54-10 Certificate

Only for model UV/IR-210/1C and UV/IR-210/1CZ

ATEX Declaration of Conformity

Only for model UV/IR-210/1Z and UV/IR-210/1CZ, suitable for use in ATEX zone 2/22

FM3260 approval

Only for model UV/IR-210/1F and UV/IR-210/1FN, (pending)

FM3611 approval

Only for model UV/IR-210/1FN, suitable for use in Class I and II, Div 2. Class III, Div 1 and 2 (pending)

Optional Swivel MountSM21

 

Material

POM

Weight

325 gram (0.7 lbs)

http://www.oggionisas.net/webx/PDF/Flame%20Detectors_EN_210seire%20CZ_v4_%20OGGIONI.pdf